Make:
Chevrolet
Model:
C-10
Year:
1969
Mileage:
1111
Miles
Condition:
Used
Country:
United States
Region:
Colorado
City:
Denver
Zip:
80202
1969 Chevrolet C/K 10 Pro Touring - Restomod -700 HP Hellcat Engine
Earth MotorCars is Proud to Present This: 1969 Chevrolet C/K 10 Pro Touring well over $150k build cost to be conservative - The 707hp Hellcrate 6.2-liter V8 engine and the matching ZF 8-speed automatic electronic-shift transmission are both brand-new Mopar units , including the complete Mopar wire harness. Steering includes rack & pinion power steering. Ice Cold A/C , Varex stainless-steel switchable exhaust system was installed, 6-piston Wilwood brakes with Hydroboost and stainless-steel brakes lines, Wheels 22x14" rear with 22x8.5" front, billet wheels. ** Scott's Custom Built Chassis** Mandrel Bent 2"x4"x.120-wall tube frame rails 1-piece 2"x4"x3/16"-wall tube IFS Crossmember 8-Point 1-1/2" DOM tubular Chassis Crossmember Tubular Upper & Lower A-Arms, 1-1/8"x1/4"-wall DOM 100% TIG-welded Stainless Steel CNC Machined Fully Adjustable Upper A-Arm Rod Front/Rear Torsion Spline Sway Bars Oversized Serviceable Press-In Ball Joints 4 corners QA1 Coilovers Built-in Anti-Dive Moser 9-inch with Limited Slip 31-spline axles, Fill & Drain Plug 1"-1/8"x1/4"-wall DOM tubing Link bars Stainless Steel CNC Machined Rod Ends 1"-1/8"x1/4"-wall DOM tubing Panhard bar FK Bearing Heim Joints 4-Bar Rear-End Housing Brackets 4-Bar Frame Brackets All Grade-8 hardware
Earth MotorCars is Proud to Present This: 1969 Chevrolet C/K 10 Pro Touring well over $150k build cost to be conservative - The 707hp Hellcrate 6.2-liter V8 engine and the matching ZF 8-speed automatic electronic-shift transmission are both brand-new Mopar units , including the complete Mopar wire harness. Steering includes rack & pinion power steering. Ice Cold A/C , Varex stainless-steel switchable exhaust system was installed, 6-piston Wilwood brakes with Hydroboost and stainless-steel brakes lines, Wheels 22x14" rear with 22x8.5" front, billet wheels. ** Scott's Custom Built Chassis** Mandrel Bent 2"x4"x.120-wall tube frame rails 1-piece 2"x4"x3/16"-wall tube IFS Crossmember 8-Point 1-1/2" DOM tubular Chassis Crossmember Tubular Upper & Lower A-Arms, 1-1/8"x1/4"-wall DOM 100% TIG-welded Stainless Steel CNC Machined Fully Adjustable Upper A-Arm Rod Front/Rear Torsion Spline Sway Bars Oversized Serviceable Press-In Ball Joints 4 corners QA1 Coilovers Built-in Anti-Dive Moser 9-inch with Limited Slip 31-spline axles, Fill & Drain Plug 1"-1/8"x1/4"-wall DOM tubing Link bars Stainless Steel CNC Machined Rod Ends 1"-1/8"x1/4"-wall DOM tubing Panhard bar FK Bearing Heim Joints 4-Bar Rear-End Housing Brackets 4-Bar Frame Brackets All Grade-8 hardware
Email
Share
Report
Favorite