Make:
Chevrolet
Model:
Impala
Year:
1961
Mileage:
755
Miles
Condition:
Used
Country:
United States
Region:
Tennessee
City:
Nashville
Zip:
37227
Sateen Silver / Red Interior / White Soft Top matching the Original Trim Tag.
Original 283/170 Engine Replaced with 283/300 Crate Engine by Mark’s Performance Engines in Phoenix, AZ.
Block Casting 3789935. This Block was used in 61-64 Passenger Cars, bored .030.
9.5 Compression Ratio with new Speed Pro Pistons
Head Casting 3947040 1.94/1.50 Valves, 64cc Combustion Chambers with new Springs, Retainers, Push Rods and Comp Cams Roller Rocker Arms
Crane 292/292H Hydraulic Camshaft with .480 Lift
Intake Manifold Casting 3919803, 1968 327 and 350 with Rochester Quadrajet Carburetor
Smooth Idle, and good power
3 Speed Manual Transmission, Column Shift
Power Convertible Top was installed in 2011, works well and is in great condition.
Upgraded to 12V Alternator
Upgraded to Power Front Disc Brakes with dual Master Cylinder. New Brake Lines, Hoses, Parking Brake Cables, etc.
Painted with Nason Ful-Cryl II Acrylic Enamel with Transtar 6841 Kwik Gloss Clearcoat.
Front Suspension Rebuild and Refinished with new hardware
New Fuel Tank
New Factory style Dual Exhaust with Resonators
New Body Mounts
New Door Window Regulators
All Weatherstrips and Gaskets are new.
Floor Pans were replaced in areas that were rusted (RH Floor and Trunk Floor)
Continental Kit
Fender Skirts (in Trunk)
All new Interior
Column Mounted Tachometer
Current Issues with the Car:
Radio is inoperative.
Fuel Guage and Temp Guage inoperative, Clock works intermittently.
Has a Transmission noise in first gear, may be normal for a Saginaw Three Speed. First gear is not synchronized.
Original 283/170 Engine Replaced with 283/300 Crate Engine by Mark’s Performance Engines in Phoenix, AZ.
Block Casting 3789935. This Block was used in 61-64 Passenger Cars, bored .030.
9.5 Compression Ratio with new Speed Pro Pistons
Head Casting 3947040 1.94/1.50 Valves, 64cc Combustion Chambers with new Springs, Retainers, Push Rods and Comp Cams Roller Rocker Arms
Crane 292/292H Hydraulic Camshaft with .480 Lift
Intake Manifold Casting 3919803, 1968 327 and 350 with Rochester Quadrajet Carburetor
Smooth Idle, and good power
3 Speed Manual Transmission, Column Shift
Power Convertible Top was installed in 2011, works well and is in great condition.
Upgraded to 12V Alternator
Upgraded to Power Front Disc Brakes with dual Master Cylinder. New Brake Lines, Hoses, Parking Brake Cables, etc.
Painted with Nason Ful-Cryl II Acrylic Enamel with Transtar 6841 Kwik Gloss Clearcoat.
Front Suspension Rebuild and Refinished with new hardware
New Fuel Tank
New Factory style Dual Exhaust with Resonators
New Body Mounts
New Door Window Regulators
All Weatherstrips and Gaskets are new.
Floor Pans were replaced in areas that were rusted (RH Floor and Trunk Floor)
Continental Kit
Fender Skirts (in Trunk)
All new Interior
Column Mounted Tachometer
Current Issues with the Car:
Radio is inoperative.
Fuel Guage and Temp Guage inoperative, Clock works intermittently.
Has a Transmission noise in first gear, may be normal for a Saginaw Three Speed. First gear is not synchronized.
Email
Share
Report
Favorite