Make:
Chevrolet
Model:
Camaro
Year:
1967
Mileage:
300
Miles
Condition:
Used
Country:
United States
Region:
New York
City:
New York City, NY
Zip:
10167
1967 Chevrolet Camaro Dupont Super Jet Black Paint Chevy performance bowtie block
As you can see, it was built to race in the quarter mile but it could be driven occasionally on the street on cool days. It runs on regular pump gas due to the mild compression at 10.5 to 1 Here is a list of most of the parts in the car. If you have any questions regarding any other parts feel free to send me a question. Engine: 555 cu. in. BBCBlock : Chevy performance bowtie block bored to 4.56"Crank: Crower 4340 steel "Enduro" 4.25" strokeRods: Crower billet 6.535" Pistons: Ross custom 4.56" 10.5:1 compRings: Total sealHeads: Edelbrock Victor CNC, polished and port matchedValves: 2.30 Severe Duty intake and 1.90" exhaustRockers: Crower Shaft Mount RollersLifters: Solid RollerCam: Comp Cams (nitrous ready) Duration @ .050 int. 262 and exhaust 270 Lift .650 int. and 680 exh. Intake: Edelbrock Victor port matchedCarb: Holley Dominator 1050 cfmAs for horsepower of this BBC, it is around 700 HP on pump gas. At a mile high the car runs in the mid to low 10's at 130 MPH on pump gas. Sea level it would be faster. The motor was built to run on Nitrous if so desired. Ignition: MSD 7AL-3 Distributor MSD and plug wires MSD Crank Trigger MSD Harmonic Damper: B-H-J and CSI electric water pumpNitrous System: NOS Big Shot system with a purge solenoid. The nitrous system is not connected, so some wiring will need to be done to use the system again.
As you can see, it was built to race in the quarter mile but it could be driven occasionally on the street on cool days. It runs on regular pump gas due to the mild compression at 10.5 to 1 Here is a list of most of the parts in the car. If you have any questions regarding any other parts feel free to send me a question. Engine: 555 cu. in. BBCBlock : Chevy performance bowtie block bored to 4.56"Crank: Crower 4340 steel "Enduro" 4.25" strokeRods: Crower billet 6.535" Pistons: Ross custom 4.56" 10.5:1 compRings: Total sealHeads: Edelbrock Victor CNC, polished and port matchedValves: 2.30 Severe Duty intake and 1.90" exhaustRockers: Crower Shaft Mount RollersLifters: Solid RollerCam: Comp Cams (nitrous ready) Duration @ .050 int. 262 and exhaust 270 Lift .650 int. and 680 exh. Intake: Edelbrock Victor port matchedCarb: Holley Dominator 1050 cfmAs for horsepower of this BBC, it is around 700 HP on pump gas. At a mile high the car runs in the mid to low 10's at 130 MPH on pump gas. Sea level it would be faster. The motor was built to run on Nitrous if so desired. Ignition: MSD 7AL-3 Distributor MSD and plug wires MSD Crank Trigger MSD Harmonic Damper: B-H-J and CSI electric water pumpNitrous System: NOS Big Shot system with a purge solenoid. The nitrous system is not connected, so some wiring will need to be done to use the system again.
Email
Share
Report
Favorite